ebs-Link Release Notes

Maytas 5.21 Release Notes

Note regarding submissions

We would like to remind providers to create a submission early and check for any errors using reports from the appropriate software (i.e. the FIS or LLWR-Inform). Welsh providers should also remember to download their ULI file. After submission to the ESFA or DfES, providers should check that data has submitted correctly using the available reports. Providers should check that all their expected starts and completions are submitted correctly, and that start and outcome payments correctly match the PFR or ACE funding reports.

Our support desk gets extremely busy in the days prior to the submission deadlines, and although we try and prioritise submission-related queries, we cannot guarantee assistance if queries are sent late. If you do encounter any issues, please ensure that you contact Maytas Support as soon as possible, as we can only rectify issues of which we are aware. We also recommend checking Maytas Communities regularly for information on any known issues and solutions. Tribal cannot be held responsible for any issues caused by your failure to comply with this advice.

Technical specification

The latest Maytas and e-track technical specification can be found here.

Once the upgrade has been completed, the version number should be checked to ensure it has been successful.

  1. Start Maytas and go to Support on the toolbar.
  2. Click About.
  3. The version numbers should read 181.20 / 5.21.7800.2. If you have any other version, please ensure you have followed the upgrade instructions correctly. If you require assistance, please contact Maytas Support.

It is the responsibility of customers to ensure that users carry out any required user acceptance testing and sign off on the upgrade.

Complete the Upgrade

Features Added in the Upgrade

These are the main updates in the upgrade:

Import Funding Information

The process for importing the required funding information into Maytas is as follows:

Re-Import the FIS Data Sets

If the 2018/19 data sets were imported in a previous version, this step can be skipped and you should proceed to importing the LARS.

If the FIS data sets for 2018/19 were not imported in a previous release, it is essential that they are imported into Maytas one final time for use by the funding cache. This should be done by importing the relevant information directly from the Data Service’s Funding Information System (FIS). To do this, you must have the FIS installed and correctly configured (please refer to the Data Service’s instructions for setting up the FIS).

Please ensure you have the latest version of the 2018/19 FIS application with the latest components installed.

Once the FIS is installed and configured, the information can be imported as follows:

  1. Perform a sync in Maytas 5, then restart Maytas 5.

  2. Go to Exports | Uploads | Upload FIS Data Sets.

  3. There are three items to configure:
    • Database Machine Name – If the FIS is installed on the same machine that you are using for Maytas 5, this can be left as (local). Otherwise, enter the machine name of the SQL server where the FIS database is held.

    • Database Instance – If the SQL server holding the FIS database has a named instance (e.g. MACHINENAME\INSTANCENAME), select Named Instance and enter the instance name. Otherwise leave this as Default Instance.

      If you have no named instance and Default Instance does not work, you may need to select Named Instance and leave the instance name blank.

    • Connection Type – This is the login for the SQL server holding the FIS database. Trusted Connection will use Windows authentication. If you wish to specify the login details, select Specific Connection and enter the credentials.
  4. Click OK. The FIS data will now be imported.
  5. If you have an Adult Skills budget contract and a transition factor, this must be entered on the contract:
    1. Go to Management on the toolbar and click Contracts on the ribbon.
    2. Select the relevant contractor, then select the Adult Skills contract on the right.
    3. Click the button.
    4. Go to the Uplifts tab.
    5. Enter the ASB Transition Factor and click OK.
    6. Click Apply to save the change.

Import LARS

The LARS for 2020/21 should be imported as follows:

  1. Download the LARS MDB file for 2020/21. At the time of this release, the latest version is the LARS MDB version 7.
  2. In Maytas, go to Exports on the toolbar.
  3. On the ILR Tools panel of the ribbon, go to Uploads | Upload Funding Information | Upload LARS (Version 7).
  4. Browse to and select the downloaded LARS file and click Open.
  5. The file will now be imported. Click OK on the message which appears.

Progress on the import can be checked by going to Home | Server Tasks | Server Jobs. Typically it will take several minutes.

Import Postcode File

  1. Obtain the postcode uplift factors file - Download the zip file under 2020 to 2021 uplift factors by postcode and LLSOA: CSV files.
  2. In Maytas, go to Exports on the toolbar.
  3. On the ILR Tools panel of the ribbon, go to Uploads | Postcode Uploads | Upload Post Code Data (2020/21).
  4. Browse to and select the postcode uplifts zip file and click Open.
  5. The file will now be imported. Click OK on the message which appears.

Progress on the import can be checked by going to Home | Server Tasks | Server Jobs. Typically this will take several minutes.

Devolved AEB postcode data is also available for importing, but it is not currently used in Maytas and so there is no need to import it. Future upgrades may require it to be imported, depending on whether the data is used in the funding calculations.

Large employer factor data sets do not need to be imported for 2020/21. LEF data for 2018/19 and earlier is included in the FIS import.

Note on the Funding Cache

By default, the funding cache will update overnight so that funding information in Maytas uses the newly-imported FIS and postcode information. Please check with your system administrator if you are unsure if or when the funding cache is updated on your system. You can also manually set the funding cache to update by going to Management | Profiles and clicking the Funding Cache button, though please be aware that this may take a long time and may use a large amount of system resources, which could affect performance for other users on the system.

Maytas 5 Version 5.21.7800.2 Release Notes

Awarding Organisations

The Awarding Bodies Interface (ABI) has been replaced with a new system called Awarding Organisations that is built into Maytas, rather than a separate application. It allows you to generate a file containing a list of learners (in the City & Guilds format) which can be sent to an awarding organisation to register and certify learners on a qualification.

To enable the new system:

  1. Go to Tools | Edit Permissions.
  2. Select the user or group which requires permission.
  3. On the Modules tab, set ABI to Visible.
  4. Click Apply.
  5. Restart Maytas for the change to take effect.

Interface Overview

To open the Awarding Organisations interface, go to Exports on the toolbar and click Awarding Organisations.

The interface will open.

The options at the top can be used to narrow down the list of results which will appear when the Search button is clicked. From this list of results, you can then choose which learners you want to include by selecting them and clicking the Add to Included button, which will move them over to the right. Finally, click Export to file to output the learners on the right to a file.

Details of the search options are as follows:

Example

  1. Select search options as required. For this example we will filter by awarding body, centre and contractor, as well as setting the start date to the start of the contract year.

    Note that leaving the Qualification as None will show all qualifications.

  2. Click the Search button. The list of results matching the search criteria will appear.

  3. By default, all results will be selected, as indicated by the tickboxes at the left of each row. However, for this example we only want to include several learners on the right to be exported. First, right-click one of the rows and select De-select All. This will un-tick all rows.

  4. Next, tick the rows to be included on the right (i.e. those to be exported).

  5. Click the Add to Included button (at the bottom-left). The selected rows will appear on the right.

    If you want to remove a row from the right (i.e. not export it), you can tick the box for that row and click the Remove button.

  6. Click the Export to file button (at the bottom-right) to export the rows on the right.

  7. A pop-up window will appear. Here you can enter the centre number, internal centre reference and batch number that you want to be recorded in the database against each objective in the batch. Click OK when ready.

  8. You will be prompted to enter a file name and choose where to save the export file. Click Save when ready.

  9. When the file has saved, the interface will now show the exported rows on the left, with the batch number entered in the search options. The batch number will also be recorded against each row to show that they were exported in that batch.

Pack Editor

The ABI Frameworks Editor has been renamed the Pack Editor and has been moved to the Exports | Award Tools panel of the ribbon.

BKSB Integration

Maytas now integrates with BKSB via the BKSB API, which allows data to be retrieved from BKSB and recorded against a learner in Maytas.

A new licence is required for the BKSB integration - please contact your account manager for more information. Instructions for installing the licence can be found in the Maytas Upgrade Guide.

Setup

Several configuration options must be set:

  1. Click the M5 button at the top-left and select Options.
  2. Under the Maytas 5 header on the left, select Other.
  3. Locate the config options on the right under the BKSBheader.
  4. Tick the box next to each option and complete as follows:
    • BKSB API url - https://live2api.bksblive2.co.uk/
    • Access Key ID - This will be provided by Tribal
    • Secret Access Key - This will be provided by Tribal
  5. Click OK.
  6. Restart Maytas

Permissions must also be set:

  1. Go to Tools | Edit Permissions.
  2. Select the user or group which requires permission.
  3. On the Modules tab, set BKSB API Integration to Visible. Note that you may also see a BKSB Initial Assessment Tracking permission here, but that is for the old method of linking Maytas to BKSB.
  4. Go to the Commands tab and expand the BKSB section.
  5. Set the permission Get BKSB Results to Visible.
  6. Click Apply.
  7. Restart Maytas for the permission to take effect.

Linking Learners Between Maytas and BKSB

There are two steps to linking a Maytas learner to a BKSB learner account:

This can be done on the BKSB tab:

  1. Open the learner's record in Maytas and go to the BKSB tab.
  2. Tick the BKSB User checkbox and click Apply.

  3. If the learner has a linked web user account with the same username as their BKSB account, the BKSB Username box can be left empty. Otherwise, enter the learner's BKSB username and click Apply.

    If the BKSB username is entered here, the learner MUST still have a web user account linked to their learner record in Maytas. Instructions for creating a linked web user can be found here.

Downloading BKSB Results for an Individual Learner

To download results from BKSB to a learner:

  1. Open the learner's record in Maytas and go to the BKSB tab.
  2. Ensure that the learner is linked to their BKSB account, as per the instructions above.

  3. On the Third Party panel of the ribbon, click BKSB Results.

  4. The BKSB Results window will appear and start downloading the learner's results from BKSB.

    If you have previously downloaded results for a learner, only changes since the last download will be included. If you wish to re-download all BKSB data for a learner, this can be done by setting the BKSBUPDATED field on the M32$_WEBUSERS table to null for the learner's web user account.

  5. When the download has finished, click Close.

  6. The results will now be visible on the BKSB tab.

Downloading Results for All BKSB Learners

Rather than downloading results for individual learners, you can also download results for all learners who have been linked to a BKSB account, as per the instructions above.

  1. Go to Management on the toolbar.
  2. On the Third Party panel of the ribbon, select BKSB | Get Results.

  3. The BKSB Results window will appear and start downloading results from BKSB for all linked learners.

    If you have previously downloaded results for a learner, only changes since the last download will be included. If you wish to re-download all BKSB data for a learner, this can be done by setting the BKSBUPDATED field on the M32$_WEBUSERS table to null for the learner's web user account.

  4. When the download has finished, click Close.

BKSB Tables

If you wish to access downloaded BKSB results data for reporting or other purposes, the data is stored in the following tables:

Name Table
Initial Assessment BKSB_INITIALASSESSMENTRESULT
Diagnostic BKSB_DIAGNOSTICASSESSMENTRESULT
Module Score BKSB_MODULESCORE
Skill Check BKSB_SKILLCHECKRESULT
Resource BKSB_RESOURCERESULT
Task BKSB_TASKRESULT
Test BKSB_TESTRESULT
Topic Score BKSB_TOPICSCORE
Questionnaire BKSB_QUESTIONNAIRERESULT
Revision BKSB_REVISIONSCENARIORESULT

Reports Scheduler

The Reports Scheduler is a new module for managing scheduled reports and report batches. It shares similar features to the scheduling side of the Reports Centre, but is designed specifically for managing schedules.

The Reports Scheduler is managed by the same permission as the Reports Centre, which is enabled by default. To disable it for a user:

  1. Go to Tools | Edit Permissions.
  2. Select the user or group which requires permission.
  3. Go to the Commands tab and expand the Reports section.
  4. Set the permission View Reports Centre to Hidden.
  5. Click Apply.
  6. Restart Maytas for the permission to take effect.

To access the Reports Scheduler, go to Home on the toolbar and click Reports Scheduler on the Reports panel of the ribbon.

The Reports Scheduler will open.

The tree view on the left lists all scheduled items, split by auto-contact reports and report batches.

Create an Auto Contact Schedule

Auto Contact schedules require a mail merge report to be configured for auto-communication. Details of this can be found here.

  1. Go to Actions on the toolbar and select New | Auto Contact.
  2. On the General tab, enter a name for the schedule. Leave the subject and message for now.
  3. Go to the Report tab and select Maytas on the left.

  4. Select the report you wish to use on the right. Note that only reports configured for auto-communication will appear here.

  5. Go back to the General tab and amend the subject and message as required (they will default to the values entered when configuring auto-communication).

  6. Go to the Report Parameters tab and click the arrow next to the chosen report to expand its parameters.

    In this example, the report filters learners based on their POT start date being between the STARTDATE and ENDDATE parameters.

  7. Configure the parameters as required.

  8. Go to the Schedule tab.

  9. On this screen, the schedule can be configured. If you have an existing schedule, you can choose it by clicking Based on and selecting it from the list. Otherwise select New.
  10. Set the schedule in the Details section. It can be set to run periodically (e.g. every hour, day, month, etc) or just once at a specified time. Please note that if you intend to start the schedule immediately, the start time should be at least 10 minutes in the future to ensure it is picked up by the system.
  11. Set the start date at the bottom of the window. The schedule will run indefinitely by default, but if you want the schedule to end on a particular date then tick the Stop this schedule on box and set the date.
  12. Click Apply on the ribbon to save the schedule.

The Log tab shows a log of when the schedule has been run, which can be filtered between two dates.

The Report Settings tab shows key information about how the report auto-communication is configured. Note that this tab is read-only.

Create a Report Batch Schedule

  1. Go to Actions on the toolbar and select New | Report Batch.

  2. On the General tab, enter a name for the batch and enter your recipient email addresses in the email recipients box at the bottom.

    There are also options to publish privately, globally or to a group, to export to PDF, CSV or Excel and to alter the filename, but for this example we will accept the defaults. Note that the default filename of {name}{ddMMyy}.zip will create a file using the batch name and the date it was created.

  3. Go to the Reports tab, where you can choose which reports to include in the batch. Click the arrow next to Maytas or Reporting Services to shows reports created in Report Generator or reports from the Reports Library respectively. The select reports will be shown at the bottom of the screen.

  4. Go to the Report Parameters screen and click the arrow next to each report to expand its parameters. Configure the parameters as required.

  5. Go to the Schedule tab.

  6. On this screen, the schedule can be configured. If you have an existing schedule, you can choose it by clicking Based on and selecting it from the list. Otherwise select New.
  7. Set the schedule in the Details section. It can be set to run periodically (e.g. every hour, day, month, etc) or just once at a specified time. Please note that if you intend to start the schedule immediately, the start time should be at least 10 minutes in the future to ensure it is picked up by the system.
  8. Set the start date at the bottom of the window. The schedule will run indefinitely by default, but if you want the schedule to end on a particular date then tick the Stop this schedule on box and set the date.
  9. Click Apply on the ribbon to save the schedule.

The Log tab shows a log of when the schedule has been run, which can be filtered between two dates.

Report Scheduler Configuration Options

There are several configuration options which can be set for the Report Scheduler:

  1. Click the M5 button at the top-left and select Options.
  2. Select Admin on the left (under the Maytas 5 header).

  3. Scroll down to the Reporting section on the right. There are three applicable options:

    • Scheduling Verbose Logging - Off by default. When this is enabled, the logs for report batches will include additional information. After enabling it, Maytas must be closed and the data service must be stopped and restarted in Maytas Server Manager (please contact Tribal if your Maytas server is managed by us).
    • Include email messages in scheduling logs - Enabled by default. This will include the contents of email messages in the log entries.
    • Remove mail attachments from scheduling log entries - Enabled by default. This will remove mail attachments when saving email content in log entries.
  4. An additional option, Scheduling Verbose Logging, can be found by selecting Auto Contact on the left (under the Maytas 5 header). This is off by default. When it is enabled, the logs for auto-contact schedules will include additional information. After enabling it, Maytas must be closed and the data service must be stopped and restarted in Maytas Server Manager (please contact Tribal if your Maytas server is managed by us).
  5. Click OK when finished.

Email and Stats Queue Alert

If there are unprocessed items in the email queue or Stats Service queue that are more than 24 hours old, Maytas will now display a banner alert to admin users upon logging in.

Off-the-Job Training Update

The off-the-job (OTJ) training tab now allows you to manually enter the number of planned hours to use in the OTJ hours calculation, which will override the default derived number of planned hours (20% of total working hours). This is done by entering the total number of planned hours to use in the Planned Hours Override field. If the override field is left empty, the default 20% will be used instead.

Example

In this example, a learner has 1175 total working hours and no planned hours override entered, so the planned hours is derived as 20% of 1175, which is 235. This is shown in the Off the job calculator field.

The learner has 100 hours of OTJ activity entered, so the OTJ hours remaining is 235 - 100 = 135.

Now we will enter the planned hours override with 250 planned hours and click Apply.

Note that the Off the job calculator field still shows the default 20% of 235, as this will always show the default derived planned hours.

However, the OTJ Hours Remaining field has changed to 150, because it is now calculating the result as 250 - 100 = 150.

Financial Planning Updates

New Funding Line Types and Cohort Groups

Financial Planning now supports the following funding line types and equivalent cohort groups for newly-created 2020/21 plans:

The new types / groups cannot automatically be added to 2020/21 plans which were created before the 5.20 SP2 release. If you wish to adapt these plans, the cohort groups must be manually added.

Cohort groups also now allow you to specify the LDM codes for an aim:

  1. Go to Management | Financial Plans and open the plan you wish to edit.
  2. Go to the Cohort Groups tab and open the cohort group you wish to edit.
  3. In the bottom half of the Edit Cohort Group window, open the aim you wish to edit.
  4. Go to the Specific Aim Details tab.

  5. Select the LDM codes as required and click OK.

  6. Click OK again, then click Apply.

New financial plans which use the new cohort groups listed above will default to using the following LDM values:

Cohort Group Default LDM values
19-24 Traineeship (2020 procurement) 377
ESFA AEB - COVID-19 Skills Offer (procured) 376 and 357
ESFA AEB - COVID-19 Skills Offer (non-procured) 376

Data Matching Enhancements

Cohort group data matching now lets you match cohort groups to current data using a funding line type, as well as learner monitoring fields.

e-track Online Release Notes – Version 5.21.7800.2

New Connection Method using ebs API

The method which e-track uses to connect to ebs is changing so that the ebs API is used instead of the existing method. As of the 5.22 release in August 2021, the old connection method for ebs-Link will be de-supported and the new connection method will be used going forward.

Setup instructions for the new connection method can be found in the ebs Upgrade Guide.

When e-track is linked to ebs using the API, the assessor links and associated learner records in ebs can now be automatically pulled from ebs based on the learner-to-staff link in ebs. Similarly, employer links can be automatically added to a learner when they are pulled through and updated from ebs.

To enable this:

  1. In e-track, go to Settings on the sidebar.
  2. Click the System configuration button.
  3. Go to ebs Link on the left (under the Others header).
  4. Tick the box for the Assessor type(s) setting on the right (in the API Settings section).
  5. Select the assessor types to be used for creating assessor links.
  6. Tick the box for the Employer type(s) setting on the right (in the same section).
  7. Select the employer types to be used for creating employer links.
  8. Click Save.

The lookups selected for the assessor and employer types must each match an equivalent lookup for the RELATIONSHP_SHORT_DESC field in ebs.

Once this has been configured, when an ebs assessor opens their caseload in e-track, any learners linked to them in ebs with a lookup matching those selected in the config option will be imported to the assessor's caseload in e-track if they are not already there.

If a learner already exists in an assessor's e-track caseload but the link in ebs is of a different assessor type (which must be selected in the config option), the existing link in e-track will be closed off and a new link will be created with the new type from ebs.

A learner must only have one assessor type in ebs for them to be imported to an assessor's caseload in e-track.

When an employer logs into e-track and views their learners, the links will be imported from ebs for employer types selected in the config option. However, unlike the assessor links it will not import learners from ebs who are not already present in e-track.

Single Sign On

e-track can now be accessed from ebs ontrack using a single login for both systems. Once configured, users in ontrack can simply select the e-track option to access e-track, without having to login again.

To set this up, several configuration options must be set (detailed below). Please contact Tribal to obtain the values required for the config options.

  1. In e-track, go to Settings on the sidebar and click the System Configuration button.
  2. Select ebs Link on the left (under the Others header).
  3. In the API Settings section on the right, tick the boxes for the following options and enter the provided values:
    • ClientId
    • Client Secret
    • Identity Server URL
  4. Click Save.

Skill Scan Updates

Skill Scan Progress Chart

The Skill Scan tab now includes a progress chart that shows a learner's average skill scan scores over time for a particular module.

There are various options above the chart which let you configure it:

Each node in the chart represents one or more skill scans used to produce an average. Hovering over a node shows the date of the scan(s) and the average score.

If there are multiple categories with the same score on the same date, these are separated out.

Edit and Delete Skill Scans

Scheduled skill scans can now be edited and deleted. Completed skill scans cannot be edited or deleted.

This requires a permission to be set:

  1. Go to Web User Editor on the sidebar.
  2. Search for and open the required user or group.
  3. Click Permissions to expand the list of permissions.
  4. In the Assessor section, tick Edit and Delete Skill Scans.
  5. Click Save.

On the Skill Scan tab, the Scheduled Skill Scans section will now have a Delete button at the end of every row.

Each row will also allow you to edit to the scheduled date and whether or not it needs to be completed by an employer. The module title and framework cannot be edited.

Skill Scans on Learner Timeline

The learner timeline now shows scheduled skill scans, coloured yellow.

Partial Completion of Skill Scans

Skill scans can now be configured to determine whether partial completion is permitted or whether a scan must be fully completed to be submitted. To configure this:

  1. On the sidebar, click Browse Modules.
  2. Search for the base module you wish to configure skill scans for and click edit at the far-right of the row.
  3. Select the base module (the top row) and click the Edit button.

  4. Select the Skill Scan tab on the sidebar which appears on the right.

  5. If a skill scan should be fully completed before submitting, ensure the Force scoring for all Skill Scan criteria checkbox is ticked.

    If you want to allow partially-completed skill scans to be submitted, ensure the checkbox is not ticked.

  6. Click Save.

When the option is ticked, an error is displayed if a user attempts to submit a partially completed skill scan for the configured module.

When the option is not ticked, users can submit partially completed skill scans. The missing scores from the scan are indicated on the Skill Scan tab with an entry of No Score.

IQA Visits Button on Files Tab

When an assessor views the Files tab for a learner, any files which have been sampled by an IQA user will have an IQA Visit button next to them.

Clicking the IQA Visit button will open the visit associated with the sample. If file was sampled in more than one visit, a dropdown will appear so you can choose which visit to view.

Restrict Visibility of Projected Completion Date

Learners can now be prevented from seeing their projected completion date via a configuration option. Note that this will hide or show the projected completion date for ALL learners, not individual learners.

  1. In e-track, go to Settings on the sidebar.
  2. Click the System configuration button.
  3. Go to Learner Login on the left (under the e-track Online header).
  4. In the General section, tick the box for the permission Restrict learners from viewing Projected Completion Date and ensure the toggle button is set to ON.
  5. Click Save.

Unsupported Browser Message

If you are using e-track in an unsupported browser, a message informing you of this will appear on the login screen.

The supported browsers for e-track are Chrome, Edge, Internet Explorer and Safari.

Email and Stats Queue Alerts

If there are unprocessed items in the email queue or Stats Service queue that are more than 24 hours old, e-track will now display a banner alert to admin users upon logging in.

You can click the System Queues link to view the items in the Status Queue and Email Queue.

You can also access the queues by going to System Queues on the sidebar.

Set Assessor Homepage

Assessor users can now be configured so that they go straight to the caseload screen after logging in, rather than the current homepage. To set this:

  1. Go to Web User Editor on the sidebar.
  2. Search for and open the required user or group.

  3. In the Account Details section, set the Start Page dropdown box as required. There are two options:

    • Default Homepage - This is the existing homepage.

    • Caseload - This will take the user straight to their caseload upon logging in.

  4. Click Save.

Generate Random Password for Users

An option can be enabled in the Web User Editor which allows you to generate a random GUID password for a user. This is primarily intended for users who are setup with LDAP authentication, where a separate e-track login will not be used.

To enable this:

  1. In e-track, go to Settings on the sidebar.
  2. Click the System configuration button.
  3. Go to Admin on the left (under the e-track Online header).
  4. In the General section, tick the box for the permission Password Generation and ensure the toggle button is set to ON.
  5. Click Save.

This will enable a button in the Web User Editor to generate a random password:

  1. Go to Web User Editor on the sidebar.
  2. Search for and open the required user or group.

  3. Click the Random button next to the Password box.

  4. Click Save.

The generated password will not be sent to anyone, as users with LDAP authentication will use their Windows login to access e-track. The purpose of the password generation is to store a complex, randomised password for the e-track web user account in the database.

Timeline - Select / De-select All

The Timeline now allows you to select or de-select all event options:

  1. Click the button at the top-right of the timeline.

  2. Click Remove All to clear all options or Select All to select all options.
  3. Click Update Timeline.

Learner Login - Off-the-Job Training Progress

Learner users can now see their off-the-job training overall progress, measured as the percentage of recorded OTJ activity hours out of the total planned OTJ hours.

To view this, on the learner home page, click the arrow to the right of Expected v Actual Progress and select OTJ. This will toggle the view of that panel to show to the OTJ Hours.

Access Off-the-Job Training Tab from Visit

The OTJ training tab can now be accessed from visits. This first needs enabling:

  1. In e-track, go to Settings on the sidebar.
  2. Click the System configuration button.
  3. Go to Assessor Login on the left (under the e-track Online header).
  4. Tick the box for the Access Off The Job Tab from Visits setting on the right (in the Visits section).
  5. Click Save.

When editing a visit with the config enabled, the Edit appointment screen will have a checkbox to Associate visit with Off The Job activity. If this is ticked, the Off The Job Tab button will appear.

Clicking the button will take you to the Off-the-Job Training tab. When OTJ activity is recorded on the tab via this method, the activity is automatically linked to the visit. Click Save, then click the Return to Visit button at the bottom of the Off-the-Job Training tab to continue editing the visit.